KT1
Using a bare thermistor chip
Sensing part: epoxy resin
Wire: cross-linked PE parallel, PVC parallel, cross-linked PE double-insulated, PVC double-insulated
Features
- A bare thermistor chip is sealed with epoxy resin
- Lower cost than using a glass-encapsulated thermistor element
| Applications | Air conditioners (room & outdoor air); fan heaters, washer dryers, printer & multi-function printer chambers (ambient); water heater tanks and toilet seats (surface) |
|---|---|
| Operating temperature | -30 to +80℃ |
| Thermal time constant | τ ≒ 5 sec. (in stirred water) |
| Dissipation constant | δ ≒ 5mW/℃ |
| Withstand voltage | 1200VAC for 1 sec. |
| Insulation resistance | ≥100MΩ at 500VDC |
| Resistance | R25 ＝ 10kΩ, R25 ＝ 5kΩ Other options available |
| B constant | B25/50 ＝ 4100K, B25/50 ＝ 3950K Other options available |
Note 1) Values in the above table are for reference only.
Note 2) Unless otherwise stated, the thermal time constant and the dissipation constant are measured in still air.
